Adding a Rope Wall Panel to Your 95 Inch Modular Walnut Climber
By Avenlur: Swedish Ladders, Jungle Gyms & Outdoor Playsets | Published: 2026-10-23
Category: How-to Guides
Learn how to safely attach the Add-On Rope Wall Panel to your 95" Modular Walnut climber. Step-by-step installation guide with common mistakes to avoid.
Quick answer
Attach the Add-On Rope Wall Panel to your 95" Modular Walnut climber using the included brackets and hardware, aligning the panel's mounting points with the pre-drilled holes on the climber's frame. This guide walks you through each step and highlights common mistakes.
Before You Start: Check Compatibility and Tools
The Add-On Rope Wall Panel is designed specifically for Avenlur modular jungle gyms, including the 95" Modular Walnut climber. Verify that your climber model matches this specification before beginning installation.
You will need a Phillips-head screwdriver and a level. The mounting hardware (brackets, screws, and bolts) is included with the panel. Do not substitute hardware; using incorrect fasteners can compromise safety.
Common Installation Mistakes to Avoid
Skipping the leveling step is the most frequent error. An uneven panel will cause the rope net to sag and may create pinch points. Always check with a level before tightening all screws.
Another common mistake is over-tightening the brackets, which can strip the pre-drilled holes or crack the walnut wood. Tighten until snug, then stop.
Installation Steps
- 1. Position the Rope Wall Panel: Place the panel against the side of the climber where you want it, aligning the mounting brackets with the pre-drilled holes on the climber's vertical beams. Make sure the panel is oriented so the rope net faces outward and the brackets sit flush against the wood.
- 2. Insert and Tighten the Bolts: Insert the provided bolts through the brackets and into the pre-drilled holes. Hand-tighten them first, then use a screwdriver to snug them. Do not fully tighten yet. Leaving bolts slightly loose allows you to adjust the panel position before final tightening.
- 3. Level the Panel: Place a level on top of the panel or along its side. Adjust the panel until it is perfectly level in both directions. Tighten all bolts fully once level. A level panel prevents the rope net from twisting and ensures even weight distribution.
- 4. Test the Attachment: Gently pull on the rope net and the panel itself to confirm it is securely fastened. Check that no bolts are loose and the panel does not wobble. If the panel moves at all, re-tighten the bolts. Never let children use the panel until it is completely secure.
Product Facts
- Add-On Rope Wall Panel for 95" Modular Walnut: This add-on panel is made to seamlessly connect with Avenlur modular jungle gyms, offering a dynamic vertical climbing challenge in a stylish and safe format. It ensures a perfect fit and secure attachment to your 95" Modular Walnut climber without needing to drill new holes or modify the frame.
Add-On Rope Wall Panel for 95" Modular Walnut
